Kategori
Marka
Stok Kodu
13.3inch e-Paper HAT (K)

960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface

Teklif İsteyiniz

Lütfen aşağıda belirtilen detayları belirterek, fiyat teklifi talebinde bulununuz.

* ile işaretli olanlar zorunlu doldurulmalıdır. 

*
*
*
*
960×680, 13.3inch E-Ink Display HAT (K) For Raspberry Pi, SPI Interface
13.3" E-PAPER HAT (K)

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

 
                            • Size13.3"
                            • Resolution960×680
                            • Viewing Angle>170°
                            • Display ColorBlack / White
                            • Grey Scale2
                            • CommunicationSPI
                            • Display PanelE-paper
                            • ExperiencePaper-like
                            • EnvironmentAmbient Light Required
                            • Display TypePassively Reflective
Features At A Glance
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR black, white
INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
OUTLINE DIMENSIONS 286.32 × 212.26mm FULL REFRESH TIME 5s
DISPLAY SIZE 275.52 × 195.16mm REFRESH POWER 66mW
DOT PITCH 0.287 × 0.287mm STANDBY CURRENT <0.01uA (almost none)
RESOLUTION 960 × 680 pixels VIEWING ANGLE >170°
Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.


Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

Raspberry Pi in the photo is NOT included.

Onboard SPI Control Interface

For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/STM32/Arduino

VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data / Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output
PWR Power on/off control

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Product Show
Outline Dimensions
Ekran Boyutu : 13.3 inch
Bu ürüne ilk yorumu siz yapın!
960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface 13.3inch e-Paper HAT (K)
960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface

Tavsiye Et

*
*
*
IdeaSoft® | Akıllı E-Ticaret paketleri ile hazırlanmıştır.