Universal E-Paper Raw Panel Driver Shield (B) For NUCLEO / Arduino, Onboard MX25R6435F Flash Chip, Supports Expanding External RAM, Suitable For Various SPI Interface E-Paper From Waveshare
Features At A Glance
- Standard Arduino connectivity, compatible with host boards like nRF528xx, UNO, Leonardo, NUCLEO, XNUCLEO
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Onboard MX25R6435F Flash chip
- Reserved external RAM soldering pads for expanding more space
- Comes with online resources and manual
Specifications
| OPERATING VOLTAGE | 3.3V/5V |
|---|---|
| INTERFACE | 3-wire SPI, 4-wire SPI |
| FLASH MEMORY SIZE | 64M-bit / 8M-byte |
| RESERVED RAM PACKAGE | SOIC-8 |
| OUTLINE DIMENSIONS | 53.34 × 53.34mm |
Comes With Adapter Board And FFC Cable
Expanding Display Interface Via FFC Cable, For Easy Connecting To The E-Paper
Pin Definition
| BOARD PIN | PIN | DESCRIPTION |
|---|---|---|
| 5V/3.3V/IOREF(default) | VCC | Power input |
| GND | GND | Ground |
| SCLK/D13 | SCLK | SPI clock input |
| MOSI/D11 | MOSI | SPI data input |
| MISO/D12 | MISO | SPI data output |
| D10 | EPD_CS | e-Paper chip selection |
| D9 | EPD_DC | e-Paper data/command |
| D8 | EPD_RST | e-Paper reset |
| D7 | EPD_BUSY | e-Paper busy |
| D6 | Flash_CS | SPI Flash chip selection |
| D5 | RAM_CS | SPI RAM chip selection |
| D4 | SCLK (Flash optional) | SPI clock input (Flash optional) |
| D3 | MOSI (Flash optional) | SPI data input (Flash optional) |
| D2 | MISO (Flash optional) | SPI data output (Flash optional) |
What's On Board
- Waveshare e-Paper driver resistor selection
- 3-wire/4-wire SPI selection
- 24PIN e-paper connector
- Arduino standard interface
- Voltage translator
- Flash Chip
- DIP switch
Arduino board SPI communication selection (ICSP by default) - ICSP header
- Power selection
IOREF by default - Reserved RAM soldering pads
Product Show
Outline Dimensions
Bu ürüne ilk yorumu siz yapın!
